This Tutorial will help you on how to flash any MTK Android devices

Requirement Before you proceed….

  • Download SP Flash tools here and extract it on Pc
  • Download and install Mediatek USB Driver skip if you are already install it
  • Original USB cable
  • At least your phone battery must be 50% up
  • PC laptop or Desktop 
  • Download exact phone Firmwarefile here

1-After extract it Run it as administrator.

2-Click on“scatter- loading” button and select the scatter.txt file [MT6572_Android_scatter.txt] from Your downloaded firmware location

3Sp flash tool will load all necessary files automatically.

4-Click check mark on all option because we are flashing the complete firmware.

5-Go to flashing options and set it as “Firmware Upgrade”, see screenshot.

6-Next, click on “Download” button from top of the tool.

7a-Connect device with pc via USB cable and don’t move it in between the firmware flashing process.
7b-Flash tool will detect your phone automatically, if not then press hold volume up or volume down key to trigger your phone.
7c-Driver installation will start automatically. Wait to update drivers.
8-Process will start and will take few minutes to flash firmware on
9-In the end of process, you will see a “Successful” message on SP Flash tool.
All Done!!! You have successfully flashed stock rom on Android MTK Phone  mobile without dead risk.
That’s the complete guide to flash Android MTK Phone . I hope this flash guide will help you to unbrick your device. All the steps are includes after performing ourselves. Sp flash tool is 100% working tool to flash stock rom on any mediatek android mobile. 
You may use this tool on any other MediaTek chipset android mobile. 
But make sure you are using only supporting firmware only.
Don’t forget to visit on our root section to root your device.

Similar Posts

Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments